Ukufakwa kwe-conveyor yebhande ngokuvamile kwenziwa ngezigaba ezilandelayo:
1. Faka ifreyimu ye-conveyor yebhande ivela kufreyimu yekhanda, bese ufaka phakathi nefreyimu ephakathi, futhi ekugcineni ufake i-tailstock.Ngaphambi kokufaka i-rack, qala ngokudonsa umugqa ophakathi ubude obugcwele besithumeli,Ngoba umugqa ophakathi nendawo we-conveyor. i-conveyor iyisimo esibalulekile sokusebenza okujwayelekile kwebhande lokudlulisa, kuyadingeka ukuvumelanisa umugqa ophakathi nendawo,Ngasikhathi sinye futhi kufanele uhlaka luhlaka, i-rack emgqeni ophakathi wephutha elivumelekile, ngemitha ubude ± 0.1mm. .Kodwa ubude obuphelele bomthumeli esikhungweni sokubeka iphutha akumele budlule u-35mm.Lapho wonke amabhlogo efakiwe futhi ekhonjwa, amabhlogo angaxhunywa.
2. Faka idrayivu.Lapho ufaka idrayivu, kubalulekile ukuqaphela ukuthi i-drive shaft ye-conveyor yebhande i-perpendicular to the centerline ye-conveyor yebhande ukuze isikhungo sobubanzi be-roller drive sihambisane ne-centerline ye-conveyor nokuthi i-axis iyunithi yegiya ihambisana ne-drive shaft.Ngasikhathi sinye, wonke ama-shafts nama-roller kufanele alinganiswe.Iphutha elivundlile le-shaft, ngokusho kobubanzi bomthumeli, livumela ububanzi buka-0.5-1.5mm.Ekufakweni kwedivayisi yokushayela ngasikhathi sinye, ungafaka isondo lomsila kanye nezinye izinto ezicindezelayo, i-axis yesigubhu sedivayisi yokucindezela, futhi isidluliseli sebhande kufanele sibe yi-perpendicular kulayini ophakathi.
3. Faka irola.Ngemuva kokufakwa kwe-rack, i-transmission kanye ne-tensioning device, ama-rollers angaphezulu naphansi angafakwa ukuze ibhande lokudlulisa libe ne-arc egobile kancane, futhi isikhala senqola sesigaba sokugoba sibe ngu-1/2 ~ 1/3. i-roller ifakiwe, kufanele iguquguquke futhi ilula.
4. Ukuqinisekiswa kokugcina kwe-conveyor yebhande.Ukuqinisekisa ukuthi ibhande lokudlulisa lihlala lisebenza emgqeni omaphakathi we-idler nesigubhu, lezi zidingo ezilandelayo kufanele zihlangatshezwe lapho kufakwa ama-roller, ama-racks nama-roller:
(1) Wonke amarola kufanele aqondaniswe, aqondane, futhi agcinwe avundlile.
(2) wonke amarola emigqeni, aqondane.
(3) Uhlaka lokusekela kufanele lube ngomugqa futhi lugcine luvundlile.Ngenxa yalesi sizathu, ngemva kokufakwa kwe-roller ne-idler stand, umugqa ophakathi nendawo kanye nezinga lomshayeli kufanele kuqedwe.
5. Bese uvikela i-rack esisekelweni noma phansi.Ngemva kokuba isidlulisi sebhande sesilungisiwe, idivayisi yokondla nokukhipha ingafakwa.
6. Uma ibhande lokuhambisa linamathiselwe, ibhande lokuthutha lisakazwa ku-roller yesigaba esingalayishiwe, futhi ngemva kokuba i-roller yokushayela izungezwe, isetshenziswa ku-idler roller.Ukulenga nge-winch yesandla engu-0.5-1.5t kusetshenziswe.Uma ibhendi ye-tension ixhunyiwe, isigubhu sedivaysi eqinisayo kufanele ihanjiswe endaweni elinganiselwe, futhi i-trolley kanye nomshini wokucindezela ovunguzayo kufanele kuhanjiswe lapho kudluliswa khona. Futhi idivayisi yokuthatha eqondile ukuhambisa isigubhu phezulu.Ngaphambi kokuqinisa ibhande lokuhambisa, kufanele kufakwe isinciphisi kanye nenjini, i-conveyor etshekisayo ukufaka idivayisi yebhuleki.
7.Ngemva kokufakwa kwe-conveyor yebhande, kuyadingeka ukwenza umshini wokuhlola ongasebenzi.Emshinini wokuhlola ongenzi lutho, naka ukusebenza kokuphambuka kwebhande lokuhambisa, ingxenye yokushayela yokushisa okusebenzayo, ukusebenza kwe-roller. , idivayisi yokuhlanza kanye nepuleti eliqondisayo kanye ne-conveyor belt surface contact degree, Yenza izinguquko ezidingekayo, Ngesikhathi esifanayo ukwenza izinguquko ezidingekayo, izingxenye zivamile ngaphambi kokuba zithwale umshini wokuhlola umthwalo.Uma ukusetshenziswa kwe-screw- thayipha idivayisi yokuqinisa amandla, ekulayisheni ngomshini wokuhlola osebenzayo, kodwa nasekuqineni kwawo bese kuba ukulungiswa.
Ngaphambi kokuthi isithuthi sebhande sisebenze, okokuqala ukuqinisekisa ukuthi imishini yokuthutha ibhande, izisebenzi, izimpahla zisesimweni esiphephile nesiqinile;Okwesibili, hlola izingxenye ezijwayelekile zokuhamba ngaphandle kwezinto zangaphandle, hlola ukuthi zonke izintambo zikagesi zivamile, zivamile. i-belt conveyor ingafakwa ekusebenzeni.Futhi ekugcineni ukuhlola i-voltage yokuhlinzeka kanye nemishini elinganiselwe umehluko we-voltage engekho ngaphezu kuka-± 5%.