conveyer belt is wide utilized in cement, coking, metallurgy, industry, steel and alternative industries wherever the delivery distance is shorter and therefore the delivery volume is smaller.
Product structure: This product uses multi-layered glue cotton canvas because the skeleton, the surface covering sensible performance rubber material, created by vulcanisation.

the conveyor belt is divided into many specifications and models depending on the use of the environment and the requirements:
1. According to the size of traffic divided by width: B200 B300 B400 B500 B600 B650 B800 B1000 B1200 B1400 B1600B1800 B2000 and other common models (B stands for wide Degree in millimeters).
2. According to the use of different environments, divided into ordinary conveyor belt includes (common type, heat-resistant, flame-retardant, burning-resistant type, acid and alkali resistant, oil-resistant), heat-resistant conveyor belt, cold-resistant conveyor belt, acid resistance
Alkaline conveyor belt, oil conveyor belt, food conveyor belt and other models. The minimum thickness of the cover rubber on ordinary conveyor belts and food conveyor belts is 3.0mm, and the minimum width of the lower cover rubber is 1.5mm. The minimum thickness of the cover tape for the tape feeding, cold-resistant conveyor belts, acid and alkali-resistant conveyor belts, and oil-resistant conveyor belts is 4.5 mm, and the minimum width of the underlay rubber is 2.0 mm. According to the specific circumstances of the use of the environment, press 1.5mm to increase the thickness of the upper and lower cover rubber.
3. According to the strength of the conveyor belt fabrics, it is divided into ordinary conveyor belts and powerful conveyor belts. Strong canvas belt is divided into nylon conveyor belt (NN conveyor belt) and polyester conveyor belt (EP conveyor band).
(1) Ordinary conveyor belts (including high-strength nylon conveyor belts) implement the GB7984-2001 standard.
Ordinary conveyor belt:Cover layer: tensile strength of not less than 15Mpa, elongation at break of not less than 350%, abrasion amount of ≤200mm3, interlayer adhesive strength of longitudinal specimens between the average cloth layer not less than 3.2N/mm, covering the gap between the rubber and fabric Not less than 2.1 N/mm
Full thickness longitudinal tear elongation of not less than 10%, full thickness longitudinal reference force elongation of not more than 1.5% Nylon (NN), Polyester (EP) Conveyor Belts:
Covering layer: tensile strength not less than 15Mpa, tearing elongation not less than 350%, wear volume ≤ 200mm3 Interlayer Adhesion Strength The average length of longitudinal specimens shall not be less than 4.5 N/mm between layers, and not less than 3.2 N/mm between overlay rubber and fabric layers.
Full-thickness longitudinal elongation at break of not less than 10%, full thickness longitudinal reference force elongation of not more than 4%
(2) Three-resistance conveyor belt (heat-resistance, acid-resistance, alkali-resistance) The product implements the HG2297-92 standard.
(3) Flame-retardant conveyor belt The product implements the MT147-95 standard.